Before creating a schedule you will want to make sure the MegaDrive is receiving power and you have line of sight to it.
Once you log in click the “Main” Network.
This will show your MegaDrive Group.
Swipe over to schedule.
Click “+ Schedule” at the bottom
Click schedule on/off the click “On”
This will show you 3 intensity slider bars. One is for the red channel, one for the white channel and the bar to the right dims both channels qually. If you want the lights to be on full power you will not need to adjust this.
Click “next” at the bottom.
Select the time you want your lights to be on then click “next” at the bottom
It will ask you what days you want the lights to obey this schedule. All of the days will already be selected so you can press next again.
It will bring you to a page where it summarizes the schedule you are setting.
Click “create” at the bottom to create this schedule.
Please keep the device you are using in the area with line of sight to the MegaDrive for at least 5 minutes until you go along to create the “off” schedule using the same steps you used to create the “on” schedule.